1 Application
It is widely applied to the dehydrated ginger, garlic, chili peppers, coriander and Chinese wild peppers.

 

2 Features
1st, this chili milling machine is Chinese patent product; it has the high milling efficiency with lower power consumption, which can grind the pepper into 30 meshes to 80 meshes (finess). This chili milling machine is different from other general milling machine, it’s specially designed for grinding chili peppers into chili powder with four rollers instead of two rollers. So in the same power consumption circumstances, its output is 2 times more than other general mill machine.

2nd,timing belt drive special design without lubricating oil, which has wonderful mute effect & more stable performance, and no pollutions to the final materials.

3rd, the round sieve built in the main body, which has 2 times longer than general sieve. It has perfect performance, not easy to be blocked, even if there is slightly blockage, the blockage can be cleared up during running.

4th, the sieve cloth and sieve frame assemble together, which saves much time to change the sieve cloth. So it is convient for customer to produce different meshes powder.

5th, this machine has high degree automation with low running cost, which save many labors and power for customers.
6th, standard barometer design has digital control to the rollers' gap, which protect the rollers effectively, and increase the powder output simultaneously.

 

The 2 pairs of rollers will press and shear to the raw materials, which will get to the final powder goal. The materials discharged from the rollers will enter to the prolonged cylinder to sift. The qualified mesh powder will be packed, and the unqualified powder will be sent to the roller again by the auger automatically.  

 

4 Installation:
Installed the mill body (inlays 2 pair of rollers) on the bottom case, and then put the transparent hopper on the top. Fix the cone hopper under the bottom of the mill body, and then connect the pipe and cyclone. Put the wind stopping device under the cyclone, the under month of the wind stopping device will connect with the inlet of the cylinder sieve. Then put the cylinder sieve connect with the auger cone hoper, and put the auger upper hopper connect with the cone hopper.

 

5 Components:
Bottom Case/Mill body/Hopper/Cyclone & pipe/Cylinder/ round sieve/motor

 

6 Preventive Maintenance：
Keep hands out off the rollers.
The rollers are not allowed to contact directly.
Overloaded running prohibited. 
If there were too low powder yield, please check if the cylinder sieve were blocked or not. You can use the brushes to clear if the sieve was blocked.